LEPTON PREAMP WITH USB OUTPUT
Main features:
- Software selectable bias: 1.25, 2.5, 5 and 10 V
- Software selectable transimpedance gain: 10^4, 10^5, 10^6 and 10^7 V/A
- Dark current cancellation: 1.24 uA to 1 mA
- Single 5 V power supply (USB type)
- Available with LEPTON DETECTOR of 1x1 mm2 or 2x2 mm2 SMD package
- Adapter available to use the preamp stage with LEPTON DETECTOR in TO-8 model
LEPTON DIGITAL AMPLIFIER SOFTWARE INCLUDED!
Software main features:
- Save signal data to disk
- Device operation: start/stop acquisition, gain and bias control
- Real-time FFT calculation
Product code:
LP-DIG-PREAMP-XX (XX=01 for1x1 mm2 detector; XX=02 for 2x2mm2 detector)
More information
| Technical specifications LEPTON ANALOG PREAMP |
|
|
Electronic characteristics:
|
|
| Readout channels: | 1 |
| Detector included: |
LEPTON DETECTOR 1x1mm2 o 2x2mm2 (uncooled) |
| Detection band: |
MWIR (1.0 - 5.0 microns) |
| Detector biasing voltage (Vbias): |
Selectable, 4 values (1.25, 2.50, 5.00, 10.00 Voltios) |
| Detector gain: | Selectable, 4 valuees (10^4, 10^5, 10^6, 10^7 V/A) |
| Rdark cancellation: | Selectable, 11 values (range 10 kOhm - 1.01 MOhm) |
| Analog output: | - DC coupling - BNC connector - Output: +/-10 V, +/-10 mA |
| Digital output: | - USB 2.0 mini B connection - ADC resolution: 14 bits - Sampling rate: 20,000 samples per second (max) |
| Noise: | 5 pA @ 1 kHz, 10^7 V/A |
| Power supply: |
- 5 VDC - Maximum current: 60 mA - Connector: USB mini B - Isolation voltage: 1000 VDC |
| Software: | Included (LEPTON DIGITAL AMPLIFIER SW SUITE) |
| Dimensions (LxWxH, mm): |
89.30 x 35.10 x 26.30 |
| Frequency response: |
|
